- #Rockchip batch tool prepare idb fail rk3066 install#
- #Rockchip batch tool prepare idb fail rk3066 driver#
- #Rockchip batch tool prepare idb fail rk3066 upgrade#
- #Rockchip batch tool prepare idb fail rk3066 full#
When I try to install everything(loader, boot, kernel, system), it executes some of the steps (checking device, lowerformat, resetting), but it fails at downloading firmware (in the same manner as RKBatchTool). If I try to replug, the box 1 stays blue.Ģ) RK Android Tool: (tested with various versions) sees the newly connected device in 'Loader mode'. when I try the recovery option (pressing 'Recover' button), it starts to do the recovery (it executes OK some steps, such as checking device, resetting device, doing lowerlevel format), but at the 2nd device reset, it stops at 'Waiting for loader'. Then, if I attempt to replug again, the box 1 is again blue.
#Rockchip batch tool prepare idb fail rk3066 upgrade#
BUT, if I attempt the upgrade again, it stops at 'Waiting for loader' step. If I re-plug the device imediately after this operation, the box 1 turns green as it should be. At 100%, it reports: 'Download firmware failed'. When it reaches 9%, the download rhythm 'accelerates', meaning that it starts to count the progress quickly, from 10% to 100%(it reaches 100% in seconds). The download starts normal, and the progress runs in normal 'rhythm' until about 9%. when I try to upgrade to stock firmware (pressing 'Upgrade' button), the operations run fine until the download firmware step. Here comes description of the behaviour I got from the tested utilities:ġ)RK Batch tool 1.5 / 1.7: both versions behave the same: when I connect the device, the box 1 turns to blue (not green). So I did my best to execute every step as the documentation required.
#Rockchip batch tool prepare idb fail rk3066 driver#
NOTE II (about preparations): WinXP manual driver installation went OK, and before each recovery attempt I put the device in flashing mode by powering up through OTG miniUSB while holding the reset button pressed with a paperclip, for 5-6 seconds. NOTE I (about virtualized environment): Before this last severe brickage, I was able to recover my device using RK Batch Tool 1.5 in a XP virtual machine on vmware RK Android tool, various version that come with custom ROMs such as Finless ROM and NeoTV ROM I tried with NO success the following Windows programs in a vmware XPsp3 virtual machine: What I've tried for recovering the non-bootable MK802 IIIS? ?t=2335535 (see the post titled 'Very frustrating: seems that rkflashtool restore isn't working on Rikomagic MK802IIIS' and the next one)
#Rockchip batch tool prepare idb fail rk3066 full#
On short: After trying to restore a full NAND backup (8 GB containing Android factory installation) with Linux program rkflashtool, although there were no errors displayed during restore operation, the device does not boot anymore. I managed to severely brick this MK802 IIIS mini-pc.
HDMI(male),Micro SD slot, USB host*1,USB OTG*1, USB power port LED(Blue) Picture format Max.8000x8000 JPEG BMP GIF PNG GPU Quad- Core 2D/ 3D/ OpenGL ES2.0(AMD Z430)/ OpenVG1Įxpansion Micro SD T-Flash(Maximum support 32GB) Rikomagic MK 802 IIIS mini PC with the following specs:ĬPU RK3066 Dual Core - Cortex-A9 Up to 1.6GHz
This is my first thread on Rikomagic forums, so greetings to all of you!
Rockchip based TV-Players RK3066 Devices MK Models - MK808, 802 etc.
0 kommentar(er)
